Replacement Battery for Aiper Scuba S1 Cordless Robotic Pool Cleaner, High-Capacity Lithium-Ion Battery Pack, Compatible with Scuba S1 Pro, DIY Repair Kit
Bring Your Aiper Scuba S1 Back to Life Is your Aiper Scuba S1 struggling to finish a full cleaning cycle? Restore its peak performance with our premium replacement battery pack. Engineered specifically for the Scuba S1 series, this battery ensures your pool stays crystal clear without the downtime.
Original Weight Matching & Zero-Buoyancy Design: Standardized with a factory-spec sealed hard case and precise weight balancing that matches the original battery's weight down to the gram. This maintains the cleaner's optimal center of gravity, preventing underwater floating or front-wheel lift ("wheelies") for steady floor tracking.
Corrosion-Resistant Hard-Shell Protection: Encapsulated in a heavy-duty, fully sealed hard case designed to withstand aggressive chlorinated pool water. Superior to shrink-wrap alternatives, it provides ultimate waterproof security, protects internal components, and drastically extends battery lifespan.
Key Features:
Perfect Compatibility: Designed specifically for the Aiper Scuba S1 and Scuba S1 Pro cordless robotic pool cleaners. Seamless fit and easy installation.
Grade A Premium Cells: Built with high-density Grade A lithium-ion cells for extended runtimes and over 500+ charge cycles.
Advanced Safety System: Integrated BMS (Battery Management System) provides protection against overcharging, overheating, and short circuits.
IPX8 Waterproof Rating: Matches the original factory sealing standards to ensure safe underwater operation.
Long-Lasting Power: Provides enough energy to cover large pools up to 1,600 sq. ft. on a single charge.
Strictly tested to meet or exceed original equipment manufacturer (OEM) standards.
This battery is very close to the original, and the connector was an exact match in both size and fit. Installation was fairly simple once I figured out which screws needed to be removed.
The only negative is that the replacement battery is slightly lighter, probably because it doesn’t have the same casing as the original. This is an easy fix, though. A tip for you DIYers: weigh the original battery and then the replacement. If there’s a difference, you can make up the weight with something you have handy, such as an old tile or a flat stone. Just place it beside the battery before closing everything back up.
Now for the positive: this battery is fantastic! On a full charge, it easily does my entire pool, and the indicator light is still blue afterward. I’m able to do the pool again on that same charge. It definitely lasts longer than the original battery.
Overall, I’m very impressed with this replacement and would definitely recommend it. My only suggestion to the vendor would be to add the missing weight to make it closer to the original battery.
The battery came within 2 weeks, Approximately, added it to my Aiper Scuba S1 and it worked perfectly. Best investment on a replacement battery and worked as expected. Thank you.
It connected properly. Test went well. Recharge was proper as well.
I had to add weight along with the new battery due to the performance of the cleaner. Old battery is heavier than the new one.
Bien reçu la batterie, mais il manquait le joint d’étanchéité, alors que normalement il était compris dans la commande. Dommage.
Heureusement la batterie fonctionne très bien.
Battery worked great and fit like a glove. Because it is lighter than original Aiper Scuba S1 battery had to add rocks in scuba base to keep it from being buoyant when vacuuming the bottom of pool.
Battery is not as heavy as one replaced. Had to add weight for unit to sink to bottom. Have to hold button 15 seconds before it turns on. Beeps while charging which did not happen with last battery. It does hold a charge and works for hours.
We had the Aiper Scuba S1 Cordless Robotic Pool vacuum for approximately 14 months and it quit working this summer. My son took it apart and said the battery in it was wet and ruined so we looked online and found that your company had the battery we needed. It was installed and a little extra waterproofing. The pool vacuum is working great thank you for having this battery available for us to purchase and install ourselves. It’s working great and we’re hoping it lasts a few more years.
Replacement Battery for pool robot.
Slightly smaller than the battery in my pool robot with same part number but comes with foam to fit tight. So far so good!
The battery fit well and works for my pool robot. What they call a "gasket" is just a foam block and not the rubber gasket for the battery compartment. I would buy again if/when I need another replacement battery.
Wasn’t the exact replacement size as original. Stated that it wasn’t for scuba S1, but another model (smaller than original). Power however, was the same, and the unit performance seems good.
